Unison Research Simply Italy. An Italian Job That Won't Blow Your Bloody Doors Off!

Audio T Manchester now have the wonderful Unison Research Simply Italy to add to our stock profile. This little beauty picks up the mantle from the equally wonderful Simply Two amplifier.

Sharing many of the characteristics and sonic attributes of the Simply Two, the Simply Italy is a more compact design with a shoe box size footprint, a single ended ultralinear class A design with 12 watts of power and utilizing LE34 valves in the output stage and ECC82 in its pre-amplifier and driver stages. Perfectly suited for small to medium size living rooms.

Unison Research have been around for more than 20 years. The Simply Italy is made at the Unison Research factory in Italy. 

The beautiful wooden panel not only looks good but helps to dampen any chassis resonances.

Nice and simple! An Input selector with a tape loop and the volume dial.

A small toggle switch takes care of the negative feedback and allows adjustments of 1.8db or 5db. You can switch between settings while listening, we prefered the 5db setting but the choice is yours. So you can tailor the sound to your musical tastes.

Chromey thinks he's back in his old pod racing days, that's not a gear lever matey. Bless him...

What Hi-Fi? reviewed the Simply Italy and loved it. Read the review here.

Canada Hifi also reviewed the Simply Italy here.

How many valves do you see?

The Russian made pentode EL34 valves and the ECC82 twin triodes with Chromey the clone trooper, all round super nice guy.

Behind bars for living a life of chrome.....ba dum tish.

Our Simply Italy valve amplifier is on demonstration at our Manchester store.  You may spot it sitting there proudly as part of our window display. So come along to the store and take a peek or even a listen if you so choose.

Keep an eye out for Dave, Munir, Mike, Simon and Haden who will be more than willing to help.

Unison Research Hi-Fi products are available from the following branches of Audio T:
Cheltenham, Oxford, Portsmouth, Reading, Manchester

New Unison Research Amps and Quad S1 Standmount Speaker at Audio T Cheltenham

After Extensive listening we have added some exiting new products to our already extensive range at the Cheltenham branch. These have all been chosen purely on the basis of sound quality and to address where we felt we had gaps in our existing range.

Unison Research Simply Italy Valve Amplifier

We have always wanted to offer the valve experience without the need to spend multiples of thousands of Pounds. Enter the Unison Research Simply Italy Ultra Linear Single Ended Class A 12 Watt Integrated amplifier.

The Simply Italy utilises ECC82 valves on the pre amplifier / driver stages and EL34 valves on the output stages. The amplifier also incorporates a new "Quasi Dual Mono" power supply allowing extremely low cross talk and low distortion.

The Simply Italy really does offer the valve experience without the usual mind blowing price tag. It offers an exceptionally open and detailed sound, pinpoint imagery and surprisingly tight and tuneful bass for such a modest output.

Technical Data:

Output Power - 12W Per Channel (Approx.)

Negative Feedback - Switchable 5dB or 1.8dB

Inputs - 5 x Line Level

Valves - 2x ECC82 (12AV7) 2 x EL34 (6CA7)

Dimension - 26 x 35 x 19cm

Unison Research Unico Nuovo Phono Amplifier

For those that want the Valve experience but also want exceptional power delivery we now offer the Unison Research Unico Nouvo.

The Unico Nouvo is a hybrid integrated amplifier based on a single triode per channel design. It Utilises 2 x ECC83 valves in parallel configuration. The output devices are fed by a symmetrical current image stage, the outputs themselves are powered mosfets. This offers a more valve influenced sound, greater channel separation and enhanced musical detail. 

In this configuration the amplifier is powerful enough to drive speakers to very high levels an still offer the sound quality only normally achieved by more expensive esoteric valve amplifiers.

The Nouvo offers four line level inputs, a Switchable MM/MC phono stage, pre amp output and line level tape output.

Technical Data:

Output Power 95W RMS 8 Ohm

Input Stage Pure Class A, Parallel Tube Design, 2 x ECC83 (12AX7)

Output Stage Dynamic Class A, Power Mosfet

Dimensions 43.5 x 9.5 x 43cm

Quad S1 Bookshelf Loudspeakers

We are constantly asked for a small loudspeakers that offer the performance of larger floor standing loudspeakers in a small room. Enter the Quad S1 Loudspeaker.

The Quad S1 stands just 285mm tall. It incorporates a 100mm bass driver and a bespoke ribbon tweeter.

The ribbon tweeter is an up to the minute design utilising the latest techniques and materials. Ribbons have always had the reputation of being delicate and easily overpowered. The ribbon developed by Quad is made using a sandwich construction that is fully immersed in a powerful magnetic field so that it accomplishes the dual role of being voice coil and sound radiator. This makes it robust enough to handle very high powered amplifiers and still offer an exceptionally open and detailed sound.

The ribbon tweeter is coupled with a 100mm Kevlar coned bass / mid driver carefully tuned to a rearward firing reflex port.

The cabinets use a sandwich construction of alternative layers of MDF and HDF to reduce panel resonances to below the audible level.

Technical Data:

Tweeter -  12 x 45mm True Ribbon

Mid / Bass Driver - 100mm Woven Kevlar Cone

Sensitivity - 84dB

Recommended Power - 25 - 100W

Nominal Impedance - 8 Ohm

Frequency Response - 58Hz - 20kHz

Dimensions - 285mm x 156mm x 270mm (H x W x D)

N.B. Quad and Unison Research products are available from a select number of Audio T Stores, so as always we would recommend you call your nearest store before travelling or check the brands page for more details.